You can select the functions you want easily and conveniently by moving and clicking the cursor on the screen, just as you would use a mouse on a computer screen.

You must pair the Magic Remote with the device to use it.
Pair the Magic Remote prior to use as follows:

1. Turn on the device. After about 20 seconds, point the remote toward the device and then press the Wheel (OK).
2. The remote control will be registered automatically, and the pairing completion message is displayed on the screen.

If the Magic Remote’s pointer does not appear on the screen, you must re-register it.

1. Hold the remote control towards the device and press the HOME and Settings buttons at the same time for more than 5 seconds until instructions appear.
2. The previously registered remote control is deregistered and then registered again.

If you have multiple LG Smart devices and want to register the Magic Remote currently in use to another device, you must unregister the previous one.

1. If you press the BACK button and the HOME button at the same time for more than 5 seconds, the LED on Magic Remote will blink and the registration will be canceled.
2. If you want to unregister and register for another LG Smart device, please follow the registration method above.